ZYX̼汾˵
1.˳ʼʱңźŵļ⣬ңźųʼµǹ
2.˻еʽбģʽ£ң΢źŵķ
1.Add the RC signal verifying when initialization,prevent ZYX from fault caused by error of initialization.
2.Fix the assignment issue of RC trim signal when the swashplate type was selected as mechanical mixer.
̼˵
1ʹUSBZYXǺ͵ӡťȷӳɹ
2ʹZYXZYX̼ļ
3ֵԡUSBߺZYXǵӣZYXǶϵԴס"SET"ťͨ磬
4ͨһֱֺ˸ʱʼťģʽɹԶ
5ȷļǣᵼǳ𻵡Ϻ趨ǡ
Firmware upgrade instruction
1.Connect the ZYX gyro to PC by ZYX USB adapter,click "Connect ZYX",make sure it succeed.
2.Open the Firmware in ZYX PC software.
3.Keep the PC,USB adapter and ZYX gyro connecting.Power off ZYX gyro,press "SET" button of gyro and power on.
4.The red lamp is flashing,click "Upgrade" button to start upgrade,the ZYX gyro will restart after successful upgrade.
5.Please make sure your gyro is Tarot ZYX,otherwise the gyro will be damaged.The ZYX gyro does not need to be setup again.

